Mitsubishi Endeavor 2004-06

Outside Mirrors

Print

Power Mirrors



Diagnosis & Testing
Operation Check

Check that the mirror moves as described in the accompanying table when each terminal is connected to the battery.

Click image to see an enlarged view

Fig. Power mirror terminal identification



Click image to see an enlarged view

Fig. Power mirror operation table

Removal & Installation
Motor
  1. Remove the front door panel as shown in the accompanying illustrations. Note the following during door panel removal:
    1. Use special tool MB990784 Ornament Remover, or equivalent trim panel removal tool to remove the power window switch panel assembly.

      Click image to see an enlarged view

      Fig. Insert the special tool as shown to carefully remove the power window switch panel

    2.  
    3. Insert special tool MB990784 Ornament Remover, or equivalent trim panel removal tool to remove the inside handle cover.

      Click image to see an enlarged view

      Fig. Use the tool to carefully remove the inside handle cover

    4.  
    5. Insert a flat-tipped screwdriver into the notch on the front door trim assembly and the rear door trim assembly until the screwdriver tip touches the clip. Disengage the clip to remove the front door trim assembly and rear door trim assembly.

      Click image to see an enlarged view

      Fig. Insert a flat-tipped screwdriver into the notch on the front door trim assembly and the rear door trim assembly until the screwdriver tip touches the clip. Disengage the clip to remove the front door trim assembly and rear door trim assembly



      Click image to see an enlarged view

      Fig. Exploded view of the front door panel removal and installation

    6.  

  2.  
  3. Remove the retainer(s) and the mirror assembly.

    Click image to see an enlarged view

    Fig. Exploded view of the power mirror and switch

  4.  
  5. Installation is the reverse of the removal procedure.
  6.  

Switch
  1. Use special tool MB990784 Ornament Remover, or equivalent trim panel removal tool to remove the power window switch panel assembly.
  2.  
  3. Remove the main switch and the mirror switch.

    Click image to see an enlarged view

    Fig. Insert the special tool as shown to carefully remove the power window switch panel



    Click image to see an enlarged view

    Fig. Exploded view of the power mirror and switch

  4.  

 
label.common.footer.alt.autozoneLogo