Mitsubishi Endeavor 2004-06

Removal & Installation

Print

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the rear seats.
  4.  
  5. Remove hole cover and remove the fuel pump module and fuel level sensor (sub).
  6.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  
  3. Connect the negative battery cable. On 2005-2006 vehicles, turn the ignition ON and then OFF , and keep it off for at least ten seconds.
  4.  

 
label.common.footer.alt.autozoneLogo