Mitsubishi Endeavor 2004-06

Relieving Fuel System Pressure

Print


CAUTION
The fuel system is under constant pressure, even with the engine off. This pressure must be relieved before disconnecting any fuel system component, fitting or fuel line connection. Failure to do so may result in personal injury.

  1. Turn the ignition switch toLOCK
  2.  
  3. Remove the left rear seat cushion mounting bolts, and lift the seat cushion to tie it to the head restraint.
  4.  
  5. Push on the floor mat to find the notches, then cut the carpet along the notches to access the service hole cover. Remove the service hole cover.
  6.  
  7. Detach the fuel pump module connector.
  8.  
  9. Start the engine and let it run out of fuel.
  10.  
  11. Attach the fuel pump module connector.
  12.  
  13. Install the service hole cover, floor mat and left rear seat cushion.
  14.  


CAUTION
The fuel system is under constant pressure, even with the engine off. This pressure must be relieved before disconnecting any fuel system component, fitting or fuel line connection. Failure to do so may result in personal injury.

  1. Turn the ignition switch to LOCK .
  2.  
  3. Remove the left rear seat cushion mounting bolts, and lift the seat cushion to tie it to the head restraint.
  4.  
  5. Push on the floor mat to find the notches, then cut the carpet along the notches to access the service hole cover. Remove the service hole cover.
  6.  
  7. Detach the fuel pump module connector.
  8.  
  9. Start the engine and let it run out of fuel.
  10.  
  11. Attach the fuel pump module connector.
  12.  
  13. Install the service hole cover, floor mat and left rear seat cushion.

    Click image to see an enlarged view

    Fig. Fuel pump connector location

  14.  

 
label.common.footer.alt.autozoneLogo