Mitsubishi Endeavor 2004-06

Solenoid or Relay

Print

Testing



Magnetic Switch Hold-In Test
  1. Disconnect the field coil wire from the M-terminal of the magnetic switch.
    WARNING
    This test must be performed quickly (in less than 10 seconds) to prevent the coil from burning.

  2.  
  3. Connect a 12-volt battery between the S-terminal and body.
  4.  
  5. Manually pull out the pinion as far as the pinion stopper position.
  6.  
  7. If the pinion remains out, everything is operating properly. If the pinion moves in, the hold-in circuit is open. Replace the magnetic switch.

    Click image to see an enlarged view

    Fig. Magnetic switch hold-in test connections

  8.  

Magnetic Switch Return Test
  1. Disconnect the field coil wire from the M-terminal of the magnetic switch.
    WARNING
    This test must be performed quickly (in less than 10 seconds) to prevent the coil from burning.

  2.  
  3. Connect a 12-volt battery between the M-terminal and body.
    CAUTION
    Do NOT get your fingers caught when pulling out the pinion.

  4.  
  5. Pull the pinion out and release. If the pinion quickly returns to its original position, everything is operating properly. If it doesn't, replace the magnetic switch.

    Click image to see an enlarged view

    Fig. Magnetic switch return test connections

  6.  

 
label.common.footer.alt.autozoneLogo