Mitsubishi Galant/Mirage/Diamante 1990-2000

Door Lock Cylinder

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the door handle/latch assembly.
  4.  
  5. Release locking tab retaining the lock cylinder to the outside handle.
  6.  
  7. Remove the lock cylinder from the outside handle and feed the illumination wire through the opening in the handle.
  8.  

To install:

  1. Route the illumination wire through the handle and install the lock cylinder.
  2.  
  3. Snap the locking tab into place retaining the lock cylinder to the outside handle.
  4.  
  5. Install the door handle/latch assembly.
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo