Mitsubishi Galant/Mirage/Diamante 1990-2000

Back-Up Light Switch

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove any components necessary to access the back-up light switch.
  4.  
  5. Unplug the back-up light switch connector.
  6.  
  7. Remove the switch from the case using the appropriate size socket and drive tool.
  8.  

To install:

  1. Install the switch and tighten it to 22-25 ft. lbs. (30-35 Nm).
  2.  
  3. Attach the back-up light switch connector.
  4.  
  5. Install any components removed to access the back-up light switch.
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo