Mitsubishi Montero, Sport 1998-06

Heater Core

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Drain the cooling system into a clean container for reuse.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Rear heater unit switch knob
     
    Rear heater control panel assembly
     
    Rear heater switch
     
    Rear floor console
     
    Resistor
     
    Rear heater hoses from the rear heater core
     
    Rear heater core from the rear heater housing

    Click image to see an enlarged view

    Fig. Rear heater core and related components-Montero Sport

     

  6.  

To install:

  1. Install or connect the following:

    Rear heater core to the rear heater housing
     
    Rear heater hoses to the rear heater core
     
    Resistor
     
    Rear floor console
     
    Rear heater switch
     
    Rear heater control panel assembly
     
    Rear heater unit switch knob
     
    Negative battery cable
     

  2.  
  3. Refill the cooling system.
  4.  
  5. Run the engine to normal operating temperatures; then, check the climate control operation and check for leaks.
  6.  

 
label.common.footer.alt.autozoneLogo