Mitsubishi Outlander 2003-06

Slave (Actuator) Cylinder

Print

Bleeding



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the undercover.
  4.  
  5. Connect a hose with a bottle to the bleeder screw. Open the bleeder nipple.
  6.  
  7. Depress the clutch pedal slowly. Open the bleeder screw to let air and fluid out. Close the bleeder screw.
  8.  
  9. Release the clutch pedal. Repeat the procedure until only fluid and no air is expelled.
  10.  
  11. Check the fluid reservoir level to ensure it stays between -MAX- and -MIN- throughout the clutch bleeding process.
  12.  

 
label.common.footer.alt.autozoneLogo