Mitsubishi Outlander 2003-06

Removal & Installation

Print

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the air mix door cable connection.
  4.  
  5. Remove the blower vent changeover damper cable connection.
  6.  
  7. Remove the knob.
  8.  
  9. Remove the center panel.
  10.  
  11. Remove the control panel assembly.

    Click image to see an enlarged view

    Fig. Exploded view of the control panel and related components

  12.  

To install:

  1. Install the control panel assembly.
  2.  
  3. Install the center panel.
  4.  
  5. Install the knob.
  6.  
  7. Install the blower vent changeover damper cable connection. Perform the following:
    1. Set the heater control blower vent changeover knob to the DEF position.
    2.  
    3. Set the heater unit-s blower vent changeover damper relay to the DEF position (turn the damper relay to the left until it stops) and install the cable.
    4.  
    5. Set the mode located to the heater unit case and secure with a clip.

      Click image to see an enlarged view

      Fig. Blower vent changeover damper cable connection

    6.  

  8.  
  9. Install the air mix door cable connection. Perform the following:
    1. Turn the heater control assembly-s temperature adjustment knob all the way to the HOT side.
    2.  
    3. Set the heater unit-s air mix door lever to the MAX HOT position (turn the damper lever as the left illustration) and attach the cable.
    4.  
    5. Set the mode locator to the heater unit case and secure with a clip.

      Click image to see an enlarged view

      Fig. Air mix door cable connection

    6.  

  10.  
  11. Connect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo