Removal & Installation
- Before servicing the vehicle, refer to the Precautions Section.
Remove or disconnect the following:
Timing belt lower coverAuto-tensionerIdler pulley and tighten the bolt to 56-62 ft. lbs. (74-84 Nm)Water pump pulley. Torque the bolt to 69-87 inch lbs. (7.8-9.8 Nm).Timing belt upper coverHarness bracketConnector bracketBattery wiring harness connectionControl wiring harness connectionCrankshaft damper pulley. Torque the bolt to 18 ft. lbs. (25 Nm).Engine undercover