Mitsubishi Outlander 2003-06

Antenna

Print

Power Antenna



Antenna Motor
Removal & Installation
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the following trim:
    1. Front pillar trim
    2.  
    3. Upper and lower quarter trim
    4.  
    5. Lower and upper center pillar trim

      Click image to see an enlarged view

      Fig. Exploded view of the interior trim



      Click image to see an enlarged view

      Fig. Interior trim clip and claw locations

    6.  

  4.  
  5. Remove the headliner assist grip.
  6.  
  7. Remove the instrument panel, as outlined in this section.
  8.  
  9. Remove the rod assembly.
  10.  
  11. Remove the antenna nut.
  12.  
  13. Remove the base.
  14.  
  15. Remove the antenna feeder assembly.
  16.  
  17. Installation is the reverse of the removal procedure.

    Click image to see an enlarged view

    Fig. Exploded view of the antenna mounting

  18.  

 
label.common.footer.alt.autozoneLogo