Mitsubishi Outlander 2003-06

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Properly relieve the fuel system pressure.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Air intake hose and the battery
     
    Fuel lines from the filter
     
    Mounting bolts and the fuel filter from the vehicle
     

  6.  

To install:

  1. If equipped with flare fitting, tighten the fitting by hand before installing the filter to the vehicle.
  2.  
  3. Install or connect the following:

    Filter to its bracket finger-tight
     
    New gaskets and connect the high pressure hose and eye bolt, then the main pipe. Tighten the eye bolts to 22 ft. lbs. (30 Nm). Tighten the flare nut to 27 ft. lbs. (37 Nm).
     

  4.  
  5. Tighten the filter mounting bolts fully.
  6.  
  7. Install or connect the following:

    Air intake hose
     
    Battery
     
    Negative battery cable, install the fuel filler cap, turn the key to theON
     

  8.  

 
label.common.footer.alt.autozoneLogo