Mitsubishi Outlander 2003-06
Brake Disc (Rotor)
Removal & Installation
Raise and safely support the vehicle.
Remove the rear wheel and tire assembly.
Unbolt and remove the caliper, but do NOT disconnect the fluid line. Suspend the caliper from the suspension with a piece of wire.
Remove the rotor. If the rotor is seized, install M8 x 1.25 bolts as shown, and remove the rotor by tightening the bolts evenly and gradually.
Fig. If you can-t remove the rotor, install the bolts as shown and tightening them evenly and gradually to remove the rotor
Installation is the reverse of the removal procedure.
Fig. Rear brake caliper and related components-2005-2006 vehicles