Mitsubishi Outlander 2003-06

Windshield Wiper System

Print

Wiper Motor



Removal & Installation
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the nut cap and nut, then remove the wiper arm and blade assemblies.
  4.  
  5. Remove the hood weather strip.
  6.  
  7. Remove the roof drip molding and front deck garnish connection.
  8.  
  9. Remove the front deck garnish.
  10.  
  11. Remove the windshield wiper motor and linkage assembly.
  12.  
  13. Separate the linkage assembly from the wiper motor.

    Click image to see an enlarged view

    Fig. Exploded view o the front wiper motor and related components

  14.  

To install:

  1. Connect the linkage to the wiper motor. Tighten the retainers to 52-78 inch lbs. (6.0-8.8 Nm).
  2.  
  3. Install the wiper motor and linkage assembly in the vehicle.
  4.  
  5. Install the front deck garnish.
  6.  
  7. Install the roof drip molding and front deck garnish connection.
  8.  
  9. Install the hood weather strip.
  10.  
  11. Install the wiper and blade assemblies:
    1. Install the wiper blades at the position shown in the accompanying illustration.

      Click image to see an enlarged view

      Fig. Proper wiper blade installation-Value A = 0.78-1.18 in. (20-30mm)

    2.  
    3. Tighten the nuts to 19-21 ft. lbs. (25-29 Nm).
    4.  

  12.  
  13. Connect the negative battery cable.
  14.  

 
label.common.footer.alt.autozoneLogo