Mitsubishi Raider 2006

Front Crankshaft Seal

Print

Removal & Installation



  1. Disconnect negative cable from battery.
  2.  
  3. Remove accessory drive belt.
  4.  
  5. Remove A/C compressor mounting fasteners and set aside.
  6.  
  7. Drain cooling system.
  8.  
  9. Remove upper radiator hose.
  10.  
  11. Disconnect electrical connector for fan mounted inside radiator shroud.
  12.  
  13. Remove radiator cooling fan
  14.  
  15. Remove crankshaft damper bolt.
  16.  
  17. Remove damper using Mitsubishi special tools 8513 and tool 1026 three jaw puller.
  18.  

To install:

  1. Using Mitsubishi special tool 8348 and 8512, install crankshaft front seal.
  2.  
  3. Install vibration damper.
  4.  
  5. Install radiator cooling fan and shroud.
  6.  
  7. Install upper radiator hose.
  8.  
  9. Install A/C compressor and tighten fasteners to 40 ft. lbs. (54 Nm).
  10.  
  11. Install accessory drive belt.
  12.  
  13. Refill cooling system.
  14.  
  15. Connect negative cable to battery.
  16.  

 
label.common.footer.alt.autozoneLogo