Mitsubishi Raider 2006

Valve Covers

Print

Removal & Installation



3.7L & 4.7L (Left Side) Engines
  1. Disconnect negative battery cable.
  2.  
  3. Remove the resonator assembly and air inlet hose.
  4.  
  5. Disconnect injector connectors.
  6.  
  7. Unclip the injector harness and route harness in front of valve cover.
  8.  
  9. Disconnect the left side breather tube and remove breather tube.
  10.  
  11. Remove valve cover mounting bolts
  12.  
  13. Remove valve cover.
  14.  
  15. Installation is the reverse of removal. Tighten valve cover bolts and studs to 105 in. lbs.
  16.  

4.7L (Right Side) Engine
  1. Disconnect negative battery cable.
  2.  
  3. Remove the air cleaner assembly, resonator assembly and air inlet hose.
  4.  
  5. Drain cooling system.
  6.  
  7. Remove accessory drive belt.
  8.  
  9. Remove air conditioning compressor retaining bolts and move the compressor to the left.
  10.  
  11. Remove heater hoses.
  12.  
  13. Disconnect injector and ignition coil connectors.
  14.  
  15. Disconnect and remove PCV hose.
  16.  
  17. Remove oil fill tube.
  18.  
  19. Unclip the injector and ignition coil harness and route harness in front of valve cover.
  20.  
  21. Disconnect the right side breather tube and filter assembly.
  22.  
  23. Remove valve cover mounting bolts
  24.  
  25. Remove valve cover.
  26.  
  27. Installation is the reverse of removal. Tighten valve cover bolts and studs to 105 in. lbs.
  28.  

 
label.common.footer.alt.autozoneLogo