Mitsubishi Raider 2006

Throttle Body

Print

Removal & Installation



3.7L Engine
  1. Remove air cleaner tube at the throttle body
  2.  
  3. Disconnect throttle body electrical connectors at the Idle Air Control (IAC)motor and Throttle Position Sensor (TPS).
  4.  
  5. Remove all control cables from the throttle body lever.
  6.  
  7. Disconnect all vacuum lines at the throttle body.
  8.  
  9. Remove throttle body mounting bolts.
  10.  
  11. Remove the throttle body from the intake manifold.
  12.  
  13. Installation is the reverse of the removal. Tighten mounting bolts to 105 in. lbs.
  14.  

4.7L Engine
  1. Remove air duct and air resonator box at the throttle body
  2.  
  3. Disconnect throttle body electrical connectors at the Idle Air Control (IAC) motor and Throttle Position Sensor (TPS).
  4.  
  5. Disconnect all vacuum lines at the throttle body.
  6.  
  7. Remove all control cables from the throttle body lever.
  8.  
  9. Remove throttle body mounting bolts.
  10.  
  11. Remove the throttle body from the intake manifold.
  12.  
  13. Installation is the reverse of the removal. Tighten mounting bolts to 105 in. lbs.
  14.  

 
label.common.footer.alt.autozoneLogo