Mitsubishi Raider 2006

Removal & Installation

Print

3.7L & 4.7L Engines



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:
    NOTE
    If you-re reusing the fan clutch, keep it upright to avoid silicone fluid loss.



    Negative battery cable
     
    Fan and clutch assembly from the pump
     
    Fan shroud mounting screws
     
    Fan shroud and fan assembly from the vehicle
     



    Accessory drive belt
     
    Upper radiator hose
     
    Water pump
     

  6.  
  7. Installation is the reverse of removal. Using a new gasket, tighten the water pump bolts, in sequence, to 43 ft. lbs. (58 Nm).

    Click image to see an enlarged view

    Fig. Water pump tightening sequence

  8.  

 
label.common.footer.alt.autozoneLogo