Montana SV6 (2006), Relay, Terraza, Uplander (2005-2007)

Removal & Installation

Print

  1. Remove the HVAC control module.
  2.  
  3. Remove the heater core.
  4.  
  5. Remove the lower HVAC module bolts/screws.
  6.  
  7. Separate the HVAC module case halves.
  8.  
  9. Remove the air temperature actuator bolts/screws.
  10.  
  11. Remove the air temperature actuator.
  12.  
  13. Remove the air temperature actuator lever.
  14.  
  15. Remove the air temperature door.
  16.  

To install:

  1. Install the air temperature door.
  2.  
  3. Install the air temperature actuator lever.
  4.  
  5. Install the air temperature actuator.
  6.  
  7. Install the air temperature actuator bolts/screws
  8.  
  9. Align and install the upper module case to the lower module case.
  10.  
  11. Install the lower HVAC module bolts/screws.
  12.  
  13. Install the heater core.
  14.  
  15. Install the HVAC control module.
  16.  
  17. Re-calibrate the actuators. For additional information, refer to the following section, -Actuator Calibration.-
  18.  

 
label.common.footer.alt.autozoneLogo