Montana SV6 (2006), Relay, Terraza, Uplander (2005-2007)

Ignition Switch

Print

Removal & Installation



  1. Disable the air bag system for zone 3.
  2.  
  3. Remove the steering column trim covers.
  4.  
  5. Remove the ignition lock cylinder.
  6.  
  7. Remove the theft deterrent exciter module from the lock cylinder housing.
  8.  
  9. Remove the screws from the ignition switch.
  10.  
  11. Remove the ignition switch from the ignition lock cylinder case.
  12.  
  13. Disconnect the ignition switch electrical connector.
  14.  

To install:

  1. Connect the ignition switch electrical connector.
  2.  
  3. Install the ignition switch to the ignition lock cylinder case.
  4.  
  5. Install the screws to the ignition switch.
  6.  
  7. Install the theft deterrent exciter module to the lock cylinder housing.
  8.  
  9. Install the ignition lock cylinder.
  10.  
  11. Install the steering column trim covers.
  12.  
  13. Enable the air bag system.
  14.  

 
label.common.footer.alt.autozoneLogo