Montana SV6 (2006), Relay, Terraza, Uplander (2005-2007)

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the lower transmission oil cooler (TOC) line from the radiator.
  4.  
  5. Remove the cooling fans and shroud.
  6.  
  7. Remove the radiator inlet hose.
  8.  
  9. Remove the radiator outlet hose.
  10.  
  11. Remove the bolt that secures the radiator to the condenser.
  12.  
  13. Remove the condenser tube clip screw.
  14.  
  15. Tilt the radiator and condenser inward toward the engine and remove the radiator.
  16.  

To install:

  1. Install the radiator.
  2.  
  3. Install the condenser tube clip screw.
  4.  
  5. Install the bolt that secures the radiator to the condenser.
  6.  
  7. Install the radiator hoses.
  8.  
  9. Install the cooling fan and shroud.
  10.  
  11. Connect the lower transmission oil cooler (TOC) line to the radiator.
  12.  
  13. Refill the cooling system.
  14.  
  15. Inspect the transmission fluid level.
  16.  

 
label.common.footer.alt.autozoneLogo