Montana, Silhouette, Venture 2000-2005

Removal & Installation

Print

  1. Remove the instrument panel accessory trim plate around the control panel.
  2.  
  3. Remove the control panel mounting screws.
  4.  
  5. Pull the control panel straight out from the instrument panel.
  6.  
  7. Disconnect the electrical connectors.
  8.  
  9. Installation is the reverse order of removal.
  10.  
  11. After installation, the actuators must be calibrated. For additional information, refer to the following section, -Actuator Calibration.-

    Click image to see an enlarged view

    Fig. Remove the screw and pull the control panel straight out of the instrument panel.

  12.  

 
label.common.footer.alt.autozoneLogo