Montana, Silhouette, Venture 2000-2005

Stabilizer Bar (Sway Bar) & Links

Print

Removal & Installation



  1. Raise and support the vehicle.
  2.  
  3. Remove the left front tire and wheel.

    Click image to see an enlarged view

    Fig. Remove the left and right stabilizer shaft insulators and brackets .



    Click image to see an enlarged view

    Fig. Remove the left and right stabilizer shaft links.

  4.  
  5. Remove the left and right stabilizer shaft links.
  6.  
  7. Remove the stabilizer shaft from the left side of the vehicle.
  8.  

To install:

  1. Install the stabilizer shaft from the left side of the vehicle.
  2.  
  3. Install the stabilizer shaft link bolt and nut and tighten the stabilizer shaft link nut to 14 inch lbs. (19 Nm).
  4.  
  5. Install the left and right stabilizer shaft insulators and brackets.
  6.  
  7. Install the left front tire and wheel.
  8.  
  9. Lower the vehicle.
  10.  

 
label.common.footer.alt.autozoneLogo