Montana, Silhouette, Venture 2000-2005

Removal & Installation

Print

  1. Remove the fuel sender assembly, as outlined in the Fuel System Section.
  2.  
  3. Disconnect the fuel pump electrical connector.
  4.  
  5. Remove the fuel level sensor electrical connector retaining clip.
  6.  
  7. Disconnect the fuel level sensor electrical connector from under the fuel sender cover.
  8.  
  9. Remove the fuel level sensor retaining clip.
  10.  
  11. Squeeze the locking tangs and remove the fuel level sensor from the modular fuel sender.
  12.  

To install:

  1. Install the fuel level sensor to the modular fuel sender.
  2.  
  3. Install the fuel level sensor retaining clip.
  4.  
  5. Connect the fuel level sensor electrical connector.
  6.  
  7. Install the fuel level sensor electrical connector retaining clip.
  8.  
  9. Connect the fuel pump electrical connector.
  10.  
  11. Install the fuel sender assembly.
  12.  
  13. Inspect for fuel leaks with the following procedure:

    Turn ON the ignition for 2 seconds.
     
    Turn OFF the ignition for 10 seconds.
     
    Turn ON the ignition.
     
    Inspect for fuel leaks.
     

  14.  

 
label.common.footer.alt.autozoneLogo