MonteCarlo 2000

Antenna

Print

Power Antenna



Removal & Installation

The power antenna mast should be cleaned when it becomes dirty. Do not lubricate the antenna mast.

  1. Open the rear compartment (trunk).
  2.  
  3. Remove the right side rear compartment trim to gain access. First unhook the netting from the tail lamp retainer nuts. Remove the trunk mat. If necessary, remove the spare tire cover and spare tire, then remove the trim panel side panels by folding down and inward. Carefully lift the trim panel from the trunk.
  4.  
  5. Disconnect the ground strap to the quarter panel.
  6.  



Click image to see an enlarged view

Fig. Power antenna mounting

  1. Detach the electrical connector from the power antenna.
  2.  
  3. Disconnect the lead-in cable from the antenna.
  4.  
  5. Remove the mounting fasteners (nuts, bolts and/or screws).
  6.  
  7. Remove the power antenna from the vehicle.
  8.  
  9. Installation is the reverse of the removal process.
  10.  

Removal & Installation



Fixed Antenna
  1. Open the rear compartment (trunk).
  2.  
  3. Remove the right side rear compartment trim to gain access. First unhook the netting from the tail lamp retainer nuts. Remove the trunk mat. If necessary, remove the spare tire cover and spare tire, then remove the trim panel side panels by folding down and inward. Carefully lift the trim panel from the trunk.
  4.  
  5. Disconnect the antenna cable from the antenna.
  6.  



Click image to see an enlarged view

Fig. Fixed antenna mounting

  1. Unscrew the fixed antenna mast from the base.
  2.  
  3. Remove the antenna bezel nut using J 38536 socket, or equivalent.
  4.  
  5. Remove the antenna base from the vehicle.
  6.  
  7. Installation is the reverse of the removal process.
  8.  

 
label.common.footer.alt.autozoneLogo