MonteCarlo 2000

Stabilizer Bar (Sway Bar) & Links

Print

Removal & Installation



Specific to:

Buick Century 1997-2000

Buick Regal 1997-2000

Chevrolet Lumina 1997-2000

Chevrolet Monte Carlo 1997-2000

Oldsmobile Cutlass Supreme 1997

Oldsmobile Intrigue 1998-2000

Pontiac Grand Prix 1997-2000

The stabilizer shaft (often called a sway bar) runs across the rear of the suspension and is isolated by rubber bushings.

Specific to:

Buick Century 1997-2000

Buick Regal 1997-2000

Chevrolet Lumina 1997-2000

Chevrolet Monte Carlo 1997-2000

Oldsmobile Cutlass Supreme 1997

Oldsmobile Intrigue 1998-2000

Pontiac Grand Prix 1997-2000

  1. Raise and safely support the vehicle.
  2.  
  3. Remove the tire and wheel assemblies from both sides.
  4.  
  5. Remove the right and left side stabilizer shaft link bolts.
  6.  
  7. Remove the insulator brackets and the bolts from the stabilizer shaft.
  8.  
  9. Remove the stabilizer shaft from the rear suspension support.
  10.  
  11. Installation is the reverse of the removal process. Please note that GM specifies that the wheel toe angle should be checked and adjusted as necessary after stabilizer shaft replacement.
  12.  

 
label.common.footer.alt.autozoneLogo