Neon, 2000 - 2005

Removal & Installation (10 of 12)

Print

  1. Raise vehicle and support.
  2.  
  3. Disconnect electrical connector from solenoid.
  4.  
  5. Disconnect vacuum tubes from solenoid.
  6.  
  7. Remove solenoid from bracket.
  8.  

To Install:


NOTE
The top of the solenoid has TOP printed on it. The solenoid will not operate unless it is installed correctly.

  1. Install solenoid on bracket.
  2.  
  3. Connect vacuum tube to solenoid.
  4.  
  5. Connect electrical connector to solenoid.
  6.  
  7. Lower vehicle.
  8.  

 
label.common.footer.alt.autozoneLogo