Neon, 2000 - 2005

Removal & Installation (5 of 12)

Print

  1. Disconnect electrical connector from coil pack.
  2.  
  3. Remove coil pack mounting bolts.
  4.  
  5. Remove coil pack.
  6.  

To Install:

  1. Install coil pack on valve cover.
  2.  
  3. Transfer spark plug cables to new coil pack. The coil pack towers are numbered with the cylinder identification. Be sure the ignition cables snap onto the towers.
  4.  

Weastec (Steel Towers)0.45-0.65 ohms @ 21-27C11.5-13.5K ohms @ 21-27C
Diamond (Copper Towers)0.53-0.65 ohms @ 21-27C10.9-14.7K ohms @ 21-27C

Identifying ignition coil resistances

Click image to see an enlarged view

Fig.

 
label.common.footer.alt.autozoneLogo