- Disconnect the negative battery cable.
- Remove the air cleaner box.
- Remove the gray and black connector from the PCM.
- Remove the harness clip bracket from PCM bracket.
- Remove the nut from the upper bracket mount.
- Raise vehicle and support on hoist.
- Remove 2 lower bracket bolts.
Remove 4 screws from bracket and remove bracket from PCM.
- Install bracket to PCM and tighten screws.
- Install PCM and bracket to body and tighten the 2 lower bolts.
- Lower vehicle.
- Install upper bracket nut and tighten.
- Clip in wiring harness bracket.
- Install gray and black connectors to the PCM.
- Install the air cleaner box.
- Connect the negative battery cable.