Neon, 2000 - 2005

Mechanical (Belt Driven) Engine Cooling Fan

Print

Removal & Installation



2000-01 Models
  1. Disconnect negative cable from battery.
  2.  
  3. Drain cooling system below the radiator upper hose level.
  4.  
  5. Remove radiator upper hose from radiator.
  6.  
  7. Disconnect radiator fan electrical connector.
  8.  
  9. Remove radiator fan screws from radiator.
  10.  
  11. Lift fan shroud up and out of lower shroud attachment clips.
  12.  
  13. For radiator fan assembly sub-component removal procedures

    Click image to see an enlarged view

    Fig. Radiator upper hose (1) and radiator upper mounts (2)

  14.  

To install:

  1. Install the radiator fan assembly into the clips on the lower radiator tank.
  2.  
  3. Install the retaining screws and tighten to 65 inch lbs. (7.5 Nm).
  4.  
  5. Connect radiator fan electrical connector.
  6.  
  7. Connect the radiator upper hose. Align hose and position clamp to prevent interference with the engine or the hood.
  8.  
  9. Connect negative cable to battery.
  10.  
  11. Fill the cooling system.
  12.  

 
label.common.footer.alt.autozoneLogo