Neon, 2000 - 2005

Removal & Installation (2 of 2)

Print

  1. Switch ignition OFF .
  2.  
  3. Unplug the switch electrical connector.
  4.  
  5. Remove the switch from the vehicle.

    Click image to see an enlarged view

    Fig. Typical low oil pressure switch used on the Neon



    Click image to see an enlarged view

    Fig. Location of oil pressure sensor

  6.  

To install:

  1. Install the switch in the vehicle and tighten securely.
  2.  
  3. Attach the electrical connector to the switch.
  4.  
  5. Switch ignition ON and check for proper function of oil pressure warning lamp.
  6.  

 
label.common.footer.alt.autozoneLogo