Nissan 240SX/Altima 1993-1998 Repair Guide

Power Sunroof

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Exploded view of the power sunroof assembly

  1. Tilt up the sunroof lid.
  2.  
  3. Remove the lid side trim.
  4.  
  5. Remove the lid bolts and the lid assembly.
  6.  
  7. Remove the rear drain mount screws and the drain.
  8.  
  9. Remove the shade assembly holders from the sunroof frame.
  10.  
  11. Remove the shade assembly.
  12.  
  13. Remove the sunroof switch, interior accessories and headliner.
  14.  
  15. Remove the switch bracket.
  16.  
  17. Remove the motor assembly, spacer and clip.
  18.  
  19. Remove the wind deflector mount holders from the sunroof frame.
  20.  
  21. Remove the wind deflector.
  22.  
  23. Disconnect the drain hose.
  24.  
  25. Remove the sunroof brackets.
  26.  
  27. Remove the sunroof frame assembly.
  28.  
  29. Remove the link and wire assemblies.
  30.  

To install:
  1. Tilt up the sunroof lid.
  2.  
  3. Install the link and wire assemblies.
  4.  
  5. Install the sunroof frame assembly.
  6.  
  7. Install the sunroof brackets.
  8.  
  9. Connect the drain hose.
  10.  
  11. Install the wind deflector.
  12.  
  13. Install the wind deflector mount holders on the sunroof frame.
  14.  
  15. Install the motor assembly, spacer and clip.
  16.  
  17. Install the switch bracket.
  18.  
  19. Install the sunroof switch, interior accessories and headliner.
  20.  
  21. Install the shade assembly.
  22.  
  23. Install the shade assembly holders on the sunroof frame.
  24.  
  25. Install the rear drain mount screws and the drain.
  26.  
  27. Install the lid bolts and the lid assembly.
  28.  
  29. Install the lid side trim.
  30.  

 
label.common.footer.alt.autozoneLogo