Nissan 240SX/Altima 1993-1998 Repair Guide

Instrument Cluster

Print

REMOVAL & INSTALLATION



See Figures 1 and 2



Click image to see an enlarged view

Fig. Fig. 1: Exploded view of the instrument cluster and related components-Altima



Click image to see an enlarged view

Fig. Fig. 2: Exploded view of the instrument cluster and related components-240SX

  1. Disarm the Supplemental Restraint System (SRS) and remove the air bag from the steering wheel.
  2.  
  3. Remove the steering wheel.
  4.  
  5. Remove the kick plate and dashboard side finisher on the driver's side.
  6.  
  7. Remove the instrument panel lower panel on the driver's side.
  8.  
  9. Remove the dashboard lower reinforcement panel.
  10.  
  11. Remove the steering column covers, spiral cable and combination switch.
  12.  
  13. Unfasten the cluster lid. Pull the cluster lid toward you, reach behind it and disconnect the electrical harnesses.
  14.  
  15. Unfasten the instrument cluster. Pull the instrument cluster toward you, reach behind it and disconnect the speedometer cable, as required.
  16.  

To install:
  1. Install the instrument cluster.
  2.  
  3. Install the cluster lid.
  4.  
  5. Install the spiral cable, combination switch and steering column covers.
  6.  
  7. Install the dashboard lower reinforcement panel.
  8.  
  9. Install the instrument panel lower panel on the driver's side.
  10.  
  11. Install the kick plate and dashboard side finisher on the driver's side.
  12.  
  13. Install the steering wheel.
  14.  
  15. Install the air bag assembly, then arm the SRS.
  16.  

 
label.common.footer.alt.autozoneLogo