Nissan 240SX/Altima 1993-1998 Repair Guide

Electric Window Motor and Regulator

Print

REMOVAL & INSTALLATION



See Figures 1, 2, 3, 4 and 5



Click image to see an enlarged view

Fig. Fig. 1: Cutaway view of the front door's inner components-Altima



Click image to see an enlarged view

Fig. Fig. 2: Cutaway view of the rear door's inner components-Altima



Click image to see an enlarged view

Fig. Fig. 3: Cutaway view of the front door's inner components-240SX



Click image to see an enlarged view

Fig. Fig. 4: The white arrows indicate power window motor attaching bolts, while the black arrows indicate window regulator attaching bolts-front door (Altima shown)



Click image to see an enlarged view

Fig. Fig. 5: The white arrows indicate power window motor attaching bolts, while the black arrows indicate window regulator attaching bolts-rear door

  1. Ensure that the window is fully closed.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Open the door fully.
  6.  
  7. Remove the inner door panel and moisture barrier.
  8.  
  9. Disconnect the electric window motor harness.
  10.  
  11. Remove the electric window motor and regulator, using the illustrations as a guide.
  12.  

To install:
  1. Install the electric window motor and regulator. Tighten the attaching bolts to the illustrated specifications.
  2.  
  3. Connect the electric window motor harness.
  4.  
  5. Connect the negative battery cable.
  6.  
  7. Operate the window to ensure proper functioning.
  8.  
  9. Adjust the window regulator mechanism, as required.
  10.  
  11. Install the moisture barrier and inner door panel.
  12.  

 
label.common.footer.alt.autozoneLogo