Nissan 240SX/Altima 1993-1998 Repair Guide

Shift Lever

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Exploded view of the manual transmission shift lever

  1. Unscrew the shift lever knob and remove.
  2.  
  3. Remove the shift lever trim panel.
  4.  
  5. Remove the hole cover and the upper boot.
  6.  
  7. Remove the lower boot retainers. Remove the lower boot.
  8.  

Take care to not damage or rip the boots.

  1. Remove the snaprings that retain the shift lever in the transmission unit.
  2.  
  3. Lift the shift lever from the transmission.
  4.  

To install:
  1. Position the shift lever in the transmission and secure it with the snaprings.
  2.  
  3. Install the lower boot and secure with the retainers.
  4.  
  5. Install the upper boot and the hole cover.
  6.  
  7. Install the shift lever trim panel.
  8.  
  9. Screw on the shift lever knob.
  10.  

 
label.common.footer.alt.autozoneLogo