Nissan_Armada_2004-2005

Decel Sensor (G-Sensor)

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the center console assembly. Remove the sensor retaining bolts. Do not use power tools to remove these bolts.
  4.  
  5. Disconnect the harness connector.
  6.  
  7. Remove the sensor from its mounting.
  8.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  
  3. Be sure to perform the calibration of yaw rate/side/decel G sensor.
  4.  

 
label.common.footer.alt.autozoneLogo