Nissan_Armada_2004-2005

Oil Pan

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove engine assembly.
  4.  
  5. Remove lower oil pan, loosening bolts in reverse order shown in figure.
  6.  
  7. Remove oil strainer from upper oil pan.
  8.  
  9. Gently pry and remove upper oil pan from engine block.
    NOTE
    Bolts are different sizes and should be kept in the correct order for reinstallation.



    Click image to see an enlarged view

    Fig. Oil pan and related parts

  10.  

To install:

  1. Apply liquid gasket to upper oil pan mating surfaces.
  2.  
  3. Install new O-rings to oil pump and front cover side.
  4.  
  5. Tighten upper oil pan bolts to 16 ft. lbs. (22 Nm) in following numerical order:
  6.  
  7. Install or connect the following:

    Rear plate cover
     
    Oil strainer to upper oil pan
     
    Lower oil pan, tightening bolts to 25 ft. lbs. (34 Nm) in order shown in figure

    Click image to see an enlarged view

    Fig. Upper oil pan bolt identification



    Click image to see an enlarged view

    Fig. Lower oil pan torque sequence

     

  8.  

 
label.common.footer.alt.autozoneLogo