Nissan_Armada_2004-2005

Lower Control Arm

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Wheel
     
    Lower shock absorber bolt
     
    Stabilizer bar connecting rod
     
    Drive shaft, if equipped with 4WD
     
    Pinch bolt from steering knuckle
     

  4.  
  5. Separate the lower ball joint from the steering knuckle.
  6.  
  7. Remove the following:

    Lower link adjusting bolts
     
    Lower link
     

  8.  

To install:

  1. Install or connect the following:

    Lower link and tighten adjusting bolts to 98 ft. lbs. (133 Nm)
     
    Lower ball joint
     
    Pinch bolt
     
    Drive shaft, if equipped with 4WD
     
    Stabilizer bar connected rod
     
    Lower shock absorber bolt
     
    Wheel
     

  2.  

 
label.common.footer.alt.autozoneLogo