Nissan_Armada_2004-2005

Intake Door Motor

Print

Removal & Installation




NOTE
Before servicing, or working around, the SRS system, turn the ignition switch OFF, disconnect both battery cables and wait at least three minutes. When servicing, or working around, the SRS system do not work directly in front of the air bag module.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Properly discharge the air conditioning system.
  4.  
  5. Remove the cooling unit assembly.
  6.  
  7. Disconnect the intake door motor electrical connector.
  8.  
  9. Remove the intake door motor retaining screws.
  10.  
  11. Remove the intake door motor from the cooling unit assembly.
  12.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

 
label.common.footer.alt.autozoneLogo