Nissan_Armada_2004-2005

Axle Housing

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and support the vehicle safely.
  4.  
  5. Remove the tire and wheel assemblies.
  6.  
  7. Remove the rear driveshaft.
  8.  
  9. Remove the rear stabilizer bar.
  10.  
  11. Remove the spare tire.
  12.  
  13. Disconnect the rear halfshaft from the rear axle assembly. Position it aside using mechanics wire or equivalent.
  14.  
  15. Disconnect the breather hose from the axle cover.
  16.  
  17. Position a suitable jack under the assembly.
    NOTE
    Do not position the jack under the aluminum cover.

  18.  
  19. Remove the rear axle assembly retaining bolts and nuts.
  20.  
  21. Carefully remove the assembly from the vehicle.
  22.  

To install:

  1. Installation is the reverse of the removal procedure.

    Click image to see an enlarged view

    Fig. Rear axle assembly and related components

  2.  

 
label.common.footer.alt.autozoneLogo