Nissan Car 350Z & Maxima 1999-06

Removal & Installation

Print

Air Mix Motor




CAUTION
After the battery cables are disconnected, do not open/close the driver and/or front passenger door with the window in the full up position. The automatic window adjusting function will not work and the side roof panel may be damaged.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Set the temperature control dial at 60 degrees.
  4.  
  5. Open the driver and front passenger window, and then disconnect the battery cable from the negative terminal.
  6.  
  7. Remove blower unit.
  8.  
  9. Disconnect air mix door motor connector.
  10.  
  11. Remove mounting screws, and then remove air mix door motor.
  12.  
  13. To install, reverse removal procedure.
  14.  

Driver-s Side
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the lower driver instrument panel.
  4.  
  5. Disconnect the driver side air mix door motor connector.
  6.  
  7. Remove the driver side air mix door motor screws.
  8.  
  9. Remove the driver side air mix door motor.
  10.  
  11. To install, reverse removal procedure.
  12.  

Passenger-s Side
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the glove box assembly.
  4.  
  5. Disconnect the passenger side air mix door motor connector.
  6.  
  7. Remove the passenger side air mix door motor screws.
  8.  
  9. Remove the passenger side air mix door motor.
  10.  

 
label.common.footer.alt.autozoneLogo