Nissan Car 350Z & Maxima 1999-06

3.5L V6 VIN D Auto 5

Print

Trouble Code: P1493



EVAP Canister Purge Control Solenoid Performance (Open)

Possible Causes:



EVAP canister purge control valve is damaged or has failed
 
EVAP canister purge control solenoid valve is damaged/failed
 
EVAP vacuum hoses are clogged or disconnected
 
EVAP canister vent control valve is damaged or has failed
 
EVAP canister is full of water, or the vapor separator has failed
 
TSB 00-060 (7/00) contains information related to this code
 

Trouble Code: P1564



ASCD Steering Switch Circuit Malfunction

Possible Causes:



ASCD steering switch connector is damaged or loose
 
ASCD steering switch signal is open or shorted to ground
 
ASCD steering switch is damaged or has failed
 

Trouble Code: P1572



ASCD Brake Switch Circuit Malfunction

Possible Causes:



ASCD or stop lamp switch is incorrectly installed or positioned
 
ASCD or stop lamp switch circuit is open or shorted to ground
 
ASCD or stop lamp switch is damaged or has failed
 

Trouble Code: P1574



ASCD Vehicle Speed Sensor Signal Malfunction

Possible Causes:



CAN communication connector is damaged or loose (open)
 
CAN communication line is open, shorted to power or to ground
 
Combination Meter VSS circuit is open or shorted to ground
 
Combination Meter is damaged or has failed
 
Vehicle Speed sensor is damaged or has failed
 

Trouble Code: P1605



A/T Diagnosis Communication Line Malfunction

Possible Causes:



TCM communication line circuit is open or shorted to ground
 
TCM communication line circuit shorted to VREF or power (B+)
 
TCM or PCM has failed
 
TSB 01-004 (01/01) contains information related to this code
 

Trouble Code: P1610



NATS Initialization Failure

Possible Causes:



Refer to the information that explains how to diagnose a problem in the NATS (system) - use a compatible Scan Tool.
 

Trouble Code: P1615



NATS IDIFFERENCE OF KEY

Possible Causes:



Refer to the information that explains how to diagnose a problem in the NATS (system) - use a compatible Scan Tool.
 

Trouble Code: P1705



A/T Throttle Position Sensor Circuit Malfunction

Possible Causes:



TP sensor circuit is open between the sensor and TCM
 
TP sensor circuit is shorted between sensor and TCM
 
TP sensor is damaged or has failed
 
TCM has failed
 

Trouble Code: P1706



A/T Park Neutral Position Switch Circuit Malfunction

Possible Causes:



PNP switch signal circuit is open or shorted to ground
 
PNP switch is shorted to VREF or system power (B+)
 
PNP switch or the PNP relay is damaged or has failed
 
PCM has failed
 

Trouble Code: P1760



A/T Overrun Clutch Solenoid Valve Circuit Malfunction

Possible Causes:



Overrun clutch solenoid control circuit is open
 
Overrun clutch solenoid control circuit is shorted to ground
 
Overrun clutch solenoid is damaged or has failed
 
TCM has failed
 

Trouble Code: P1805



A/T Brake Switch Circuit Malfunction

Possible Causes:



Stop lamp switch connector is damaged or loose (open circuit)
 
Stop lamp switch power circuit is open (test the No. 2 15A fuse)
 
Stop lamp switch is damaged or has failed (it may be shorted)
 

Trouble Code: P2122



Accelerator Pedal Position Sensor 1 Signal Low Input

Possible Causes:



APP1 sensor connector is damaged (it may be shorted)
 
APP1 sensor signal circuit is shorted to ground
 
APP1 sensor signal circuit is damaged or has failed
 
PCM is damaged or has failed
 

Trouble Code: P2123



Accelerator Pedal Position Sensor 1 Signal High Input

Possible Causes:



APP1 sensor connector is damaged (it may be open)
 
APP1 sensor signal circuit is shorted to VREF or system power
 
APP1 sensor signal circuit is damaged or has failed
 

Trouble Code: P2127



Accelerator Pedal Position Sensor 2 Signal Low Input

Possible Causes:



APP2 sensor connector is damaged (it may be shorted)
 
APP2 sensor signal circuit is shorted to ground
 
APP2 sensor signal circuit is damaged or has failed
 
PCM is damaged or has failed
 

Trouble Code: P2128



Accelerator Pedal Position Sensor 2 Signal High Input

Possible Causes:



APP2 sensor connector is damaged (it may be open)
 
APP2 sensor signal circuit is shorted to VREF or system power
 
APP2 sensor signal circuit is damaged or has failed
 

Trouble Code: P2135



Throttle Position Sensor Range/Performance

Possible Causes:



TP1 or TP2 sensor connector is damaged (open or shorted)
 
TP1 sensor signal circuit is open or shorted to ground
 
TP1 sensor signal circuit is damaged or has failed
 
TP2 sensor signal circuit is open or shorted to ground
 
TP2 sensor signal circuit is damaged or has failed
 
PCM is damaged or has failed
 

Trouble Code: P2138



Accelerator Pedal Position Sensor Range/Performance

Possible Causes:



APP1 or APP2 sensor connector is damaged (open or shorted)
 
APP1 sensor signal circuit is open or shorted to ground
 
APP1 sensor signal circuit is damaged or has failed
 
APP2 sensor signal circuit is open or shorted to ground
 
APP2 sensor signal circuit is damaged or has failed
 
PCM is damaged or has failed
 

Trouble Code: U1000



Controller Area Network Line Malfunction

Possible Causes:



CAN connector is damaged or is disconnected
 
CAN communication line is open, shorted to ground or to power
 
One of the modules is shorted and pulling the CAN voltage low
 

Trouble Code: U1001



Controller Area Network Line Malfunction

Possible Causes:



CAN connector is damaged or is disconnected
 
CAN communication line is open, shorted to ground or to power
 
One of the modules is shorted and pulling the CAN voltage low
 

 
label.common.footer.alt.autozoneLogo