Nissan Car 350Z & Maxima 1999-06

3.5L V6 VIN D Std 1

Print

3.5L V6 VIN D Std

Trouble Code: P0000



No Self-Diagnostic Malfunction Detected

Possible Causes:



This trouble code indicates there are no codes in any other onboard controllers on this vehicle!
 

Trouble Code: P0011



Intake Valve Timing Control Range/Performance (Bank 1)

Possible Causes:



Check for an accumulation of debris on the CMP sensor pickup
 
CKP POS sensor or CMP Phase sensor signal is erratic
 
IVT connector is damaged or loose (an intermittent fault)
 
IVT solenoid control circuit is open or shorted to ground
 
IVT solenoid is damaged or has failed
 
PCM has failed
 

Trouble Code: P0021



Intake Valve Timing Control Range/Performance (Bank 2)

Possible Causes:



Check for an accumulation of debris on the CMP sensor pickup
 
CKP POS sensor or CMP Phase sensor signal is erratic
 
IVT connector is damaged or loose (an intermittent fault)
 
IVT solenoid control circuit is open or shorted to ground
 
IVT solenoid is damaged or has failed
 
PCM has failed
 

Trouble Code: P0031



HO2S-11 (Bank 1 Sensor 1) Heater Circuit Low Input

Possible Causes:



HO2S heater control connector is damaged or loose (open)
 
HO2S heater power circuit is open (check the No. 8 fuse - 15A)
 
HO2S heater assembly is damaged or has failed
 
PCM has failed
 

Trouble Code: P0032



HO2S-11 (Bank 1 Sensor 1) Heater Circuit High Input

Possible Causes:



HO2S heater control connector is damaged or loose (shorted)
 
HO2S heater control circuit is shorted to ground
 
HO2S heater assembly is damaged or has failed
 
PCM has failed
 

Trouble Code: P0037



HO2S-12 (Bank 1 Sensor 2) Heater Circuit Low Input

Possible Causes:



HO2S heater control connector is damaged or loose (open)
 
HO2S heater power circuit is open (check the No. 8 fuse - 15A)
 
HO2S heater assembly is damaged or has failed
 
PCM has failed
 

Trouble Code: P0038



HO2S-12 (Bank 1 Sensor 2) Heater Circuit High Input

Possible Causes:



HO2S heater control connector is damaged or loose (shorted)
 
HO2S heater control circuit is shorted to ground
 
HO2S heater assembly is damaged or has failed
 
PCM has failed
 

Trouble Code: P0051



Air Fuel Sensor 2 (Bank 2 Sensor 1) Heater Low Input

Possible Causes:



A/F sensor connector is damaged or loose
 
A/F sensor heater control circuit is open or shorted to ground
 
A/F sensor heater assembly is damaged or has failed
 
A/F sensor heater relay circuit is open or the relay has failed
 
PCM has failed
 

Trouble Code: P0052



Air Fuel Sensor 2 (Bank 2 Sensor 1) Heater High Input

Possible Causes:



A/F sensor connector is damaged or loose
 
A/F sensor heater control circuit is shorted to power
 
A/F sensor heater assembly is damaged or has failed
 
A/F sensor heater relay has failed
 
PCM has failed
 

Trouble Code: P0057



Heated Oxygen Sensor 2 (Bank 2 Sensor 2) Heater Control Circuit Low Input

Possible Causes:



HO2S-22 connector is damaged or loose
 
HO2S-22 heater control circuit is open or shorted to ground
 
HO2S-22 heater assembly is damaged or has failed
 
HO2S-22 heater relay circuit is open or the relay has failed
 
PCM has failed
 

Trouble Code: P0058



Heated Oxygen Sensor 2 (Bank 2 Sensor 2) Heater Control Circuit High Input

Possible Causes:



HO2S-22 connector is damaged or loose
 
HO2S-22 heater control circuit is shorted to power
 
HO2S-22 heater assembly is damaged or has failed
 
HO2S-22 heater relay has failed
 
PCM has failed
 

Trouble Code: P0101



Mass Airflow Sensor Circuit Malfunction

Possible Causes:



Air Intake leaks located after the MAF sensor assembly
 
MAF sensor signal circuit is open, shorted to ground or power
 
MAF sensor has failed
 
PCM has failed
 

Trouble Code: P0102



Mass Airflow Sensor Circuit Low Input

Possible Causes:



MAF sensor signal circuit is shorted to ground
 
MAF sensor power circuit is open (check for power from relay)
 
MAF sensor is damaged or has failed
 
PCM is damaged
 
TSB 03-035 (7/03) contains information related to this code
 

Trouble Code: P0103



Mass Airflow Sensor Circuit High Input

Possible Causes:



MAF sensor signal circuit is open (check for loose connector)
 
MAF sensor is shorted to VREF or system power
 
MAF sensor is damaged or has failed
 
PCM is damaged
 

Trouble Code: P0105



Absolute Pressure Sensor Circuit Malfunction

Possible Causes:



Absolute pressure sensor signal circuit open, shorted to ground
 
Absolute pressure sensor signal circuit shorted to VREF
 
Absolute pressure sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0110



Intake Air Temperature Sensor Signal Range/Performance

Possible Causes:



IAT sensor circuit open, shorted to ground or to power
 
IAT sensor is damaged or has failed (may be out of calibration)
 
PCM has failed
 

Trouble Code: P0112



Intake Air Temperature Sensor Circuit Low Input

Possible Causes:



IAT sensor connector is damaged (it may be shorted)
 
IAT sensor circuit is shorted to ground
 
IAT sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0113



Intake Air Temperature Sensor Circuit High Input

Possible Causes:



IAT sensor circuit is open or shorted to VREF
 
IAT sensor ground circuit is open
 
IAT sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0115



Engine Coolant Temperature Sensor Circuit Malfunction

Possible Causes:



ECT sensor circuit open or shorted to ground
 
ECT sensor circuit shorted to VREF or to system power
 
ECT sensor is damaged or has failed (out of calibration)
 
PCM has failed
 

Trouble Code: P0117



Engine Coolant Temperature Sensor Circuit Low Input

Possible Causes:



ECT sensor circuit is shorted to ground
 
ECT sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0118



Engine Coolant Temperature Sensor Circuit High Input

Possible Causes:



ECT sensor circuit is open or the ground circuit is open
 
ECT sensor circuit is shorted to sensor VREF
 
ECT sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0120



Throttle Position Sensor Circuit Malfunction

Possible Causes:



TP sensor circuit open, shorted to ground or to power
 
TP sensor is damaged or has failed (perform a sweep test)
 
PCM has failed
 

Trouble Code: P0122



Throttle Position Sensor 2 Circuit Low Input

Possible Causes:



TP sensor 2 connector is damaged or loose (intermittent fault)
 
TP sensor 2 signal circuit is shorted to ground
 
TP sensor 2 is damaged, or the ETC Actuator has failed
 

Trouble Code: P0123



Throttle Position Sensor Circuit High Input

Possible Causes:



TP sensor connector is damaged or loose (intermittent open)
 
TP sensor circuit is open or shorted to VREF
 
TP sensor is damaged
 
PCM has failed
 

Trouble Code: P0125



ECT Sensor Excessive Time To Enter Closed Loop

Possible Causes:



Check the operation of the thermostat (it may be stuck open)
 
ECT sensor circuit has high resistance
 
ECT sensor is contaminated, damaged or out-of-calibration
 
Inspect for low coolant level or an incorrect coolant mixture
 
PCM has failed
 

Trouble Code: P0127



Intake Air Temperature Sensor Range/Performance

Possible Causes:



IAT sensor connector is damaged or loose (intermittent fault)
 
IAT sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0128



Thermostat System Function

Possible Causes:



Inspect for low coolant level or for an incorrect coolant mixture
 
Test the thermostat operation (it me be leaking or stuck open)
 
ECT sensor is damaged or has failed
 

Trouble Code: P0130



HO2S-11 (Bank 1 Sensor 1) Closed Loop Fuel Control

Possible Causes:



HO2S signal circuit is open or shorted to ground
 
HO2S is contaminated, damaged or it has failed
 

Trouble Code: P0131



HO2S-11 (Bank 1 Sensor 1) Circuit Low Input (Lean Shift)

Possible Causes:



HO2S may be contaminated or it has failed
 
HO2S heater is damaged or has failed
 
Low fuel pressure, fuel filter restricted or fuel injectors plugged
 

Trouble Code: P0132



HO2S-11 (Bank 1 Sensor 1) Circuit High Input (Rich Shift)

Possible Causes:



Fuel pressure regulator leaking or fuel injectors leaking
 
HO2S may be contaminated or it has failed
 
HO2S heater is damaged or has failed
 

Trouble Code: P0133



HO2S-11 (Bank 1 Sensor 1) Slow Response

Possible Causes:



Air leaks in the exhaust manifold or in the exhaust pipes
 
Air leaks somewhere in the engine (e.g., intake manifold)
 
Air leaks somewhere in the PCV system (e.g., the PCV valve)
 
Fuel pressure to low, or one or more restricted fuel injectors
 
HO2S connector is damaged or loose (an intermittent problem)
 
HO2S element is contaminated
 
HO2S heater is damaged or it has failed
 
HO2S signal circuit is open or shorted to ground
 
MAF sensor out of calibration (it may be dirty or contaminated)
 

Trouble Code: P0134



HO2S-11 (Bank 1 Sensor 1) Insufficient Activity Detected

Possible Causes:



HO2S element is contaminated, damaged or it has failed
 
HO2S heater is damaged or has failed
 
HO2S signal circuit is open or shorted to ground
 
TSB 02-002 (1/02) contains information related to this code
 

Trouble Code: P0135



HO2S-11 (Bank 1 Sensor 1) Heater Circuit Malfunction

Possible Causes:



HO2S heater control circuit is open, shorted to ground or power
 
HO2S heater is damaged or has failed
 
PCM has failed
 
TSB 02-002 (1/02) contains information related to this code
 

Trouble Code: P0136



HO2S-12 (Bank 1 Sensor 2) Closed Loop Fuel Control

Possible Causes:



HO2S signal circuit is open or shorted to ground
 
HO2S is damaged or has failed
 
PCM has failed
 

Trouble Code: P0137



HO2S-12 (Bank 1 Sensor 2) Circuit Low Input (Lean Shift)

Possible Causes:



Low fuel pressure, fuel filter restricted or fuel injectors plugged
 
HO2S may be contaminated or it has failed
 
HO2S heater is damaged or has failed
 
PCM has failed
 

Trouble Code: P0138



HO2S-12 (Bank 1 Sensor 2) Circuit High Input (Rich Shift)

Possible Causes:



Fuel pressure regulator leaking or fuel injectors leaking
 
HO2S may be contaminated or it has failed
 
HO2S heater is damaged or has failed
 
PCM has failed
 
TSB 01-016 (9/01) contains information related to this code
 

Trouble Code: P0139



HO2S-12 (Bank 1 Sensor 2) Slow Response

Possible Causes:



Air leaks in the engine, exhaust manifold or in the PCV system
 
Fuel pressure to low, or one or more restricted fuel injectors
 
HO2S element is contaminated, or the HO2S circuit is shorted
 
HO2S heater is damaged or it has failed
 
MAF sensor out of calibration (it may be dirty or contaminated)
 

Trouble Code: P0140



HO2S-12 (Bank 1 Sensor 2) Insufficient Activity Detected

Possible Causes:



Air leaks in the intake manifold or exhaust manifold or pipes
 
HO2S contaminated with wrong fuel, has deteriorated or failed
 
HO2S signal circuit is open or shorted to ground (intermittent)
 
PCM has failed
 
TSB 01-016 (9/01) contains information related to this code
 

Trouble Code: P0141



HO2S-12 (Bank 1 Sensor 2) Heater Circuit Malfunction

Possible Causes:



HO2S heater control circuit is open or shorted to ground
 
HO2S heater control circuit is shorted to power
 
HO2S heater is damaged or has failed
 
PCM has failed
 

Trouble Code: P0150



HO2S-21 (Bank 2 Sensor 1) Closed Loop Fuel Control

Possible Causes:



HO2S signal circuit is open or shorted to ground
 
HO2S is damaged or has failed
 
PCM has failed
 
TSB 01-016 (9/01) contains information related to this code
 

 
label.common.footer.alt.autozoneLogo