Nissan Car 350Z & Maxima 1999-06

Tower Bar

Print

Removal & Installation





Click image to see an enlarged view

Fig. View of tower bar and components

  1. Fix center bolt, and then loosen nut in the right and left side.
  2.  
  3. Loosen center bolt to the direction in the figure on 660 degrees (Or turn bolt 1.7 times) to place the black mark of center bolt above.
  4.  
  5. Remove tower bar fixing bolts and nuts, and remove tower bar from vehicle with power tool.
  6.  

To install:

  1. Install tower bar
    NOTE
    If it is hard to install tower bar, install it turning center bolt.

  2.  
  3. Tighten center bolt to the direction in the figure on 660- (Or turn bolt 1.7 times) to place the black mark of center bolt above.
    NOTE
    The space between tower bar and engine collector should be between 0.394 in (10.0 mm) and 0.669 in (17.0 mm).

  4.  
  5. Tighten both nut of the right and left side of center bolt.
  6.  

 
label.common.footer.alt.autozoneLogo