Nissan Car 350Z & Maxima 1999-06

Removal & Installation

Print



Click image to see an enlarged view

Fig. Removing power steering pump and exploded view of power steering pump

To remove power steering pump, refer to illustration.



Click image to see an enlarged view

Fig. Removing power steering pump and exploded view of power steering pump

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Drain power steering fluid.
  6.  
  7. Loosen adjustment screw and power steering pump through bolt, then remove belt.
  8.  
  9. Remove power steering pump union bolts and hose.
  10.  
  11. Remove power steering pump bracket bolts.
  12.  
  13. Remove power steering pump.
  14.  
  15. To install, reverse removal procedure.
  16.  
  17. Adjust belt tension.
  18.  
  19. Bleed air from the system
  20.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Engine cover
     
    Air cleaner box
     
    Water from radiator upper tank, them radiator upper hose
     
    Radiator fan shroud
     
    Loosen idler pulley, then remove belt
     

  4.  
  5. Drain power steering fluid.
  6.  
  7. Remove piping of high pressure and low pressure and the drain fluid from their piping.
  8.  
  9. Remove bolt common to water pump and power steering pump.
  10.  
  11. Remove bolt then remove power steering pump.
  12.  

 
label.common.footer.alt.autozoneLogo