Nissan Car 350Z & Maxima 1999-06

Stabilizer Bar (Sway Bar)

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Raise and safely support the vehicle.
  4.  
  5. Disconnect the stabilizer bar ends from the connecting rods using power tool.
  6.  
  7. Remove the stabilizer bar clamps and bushings using power tool.
  8.  
  9. Remove the stabilizer bar.
  10.  
  11. To install, reverse removal procedure.
  12.  

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Raise and safely support the vehicle.
  4.  
  5. Remove fixing bolts and remove stabilizer connecting rod mount bracket from suspension arm.
  6.  
  7. Remove lower side fixing nut on stabilizer connecting rod and remove stabilizer connecting rod from stabilizer bar with power tool.
  8.  
  9. Remove fixing nut on stabilizer clamp and remove stabilizer from vehicle with power tool.
  10.  
  11. To install, reverse removal procedure.
    NOTE
    Stabilizer bar uses pillow ball type connecting rod, position ball joint with case on pillow ball head parallel to stabilizer bar.

  12.  

 
label.common.footer.alt.autozoneLogo