Nissan Car 350Z & Maxima 1999-06

Removal & Installation

Print

Tie Rod



  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Tie rod nut
     
    Tie rod outer socket from the steering knuckle with special tool HT72520000
     
    Tie rod end

    Click image to see an enlarged view

    Fig. Separate the tie rod end from the steering knuckle with tool HT72520000

     

  4.  

To install:

  1. Install or connect the following:
    NOTE
    Tightening torque for the castle nut cannot exceed 36 ft. lbs. (49 Nm).



    Tie rod end to the steering knuckle and torque the bolts to 29 ft. lbs. (39 Nm)
     
    Negative battery cable
     

  2.  

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Tie rod nut
     
    Tie rod outer socket from the steering knuckle with special tool HT72520000
     
    Tie rod end

    Click image to see an enlarged view

    Fig. Separate the tie rod end from the steering knuckle with tool HT72520000

     

  4.  

To install:

  1. Install or connect the following:
    NOTE
    Tightening torque for the castle nut cannot exceed 36 ft. lbs. (49 Nm).



    Tie rod end to the steering knuckle and torque the bolts to 29 ft. lbs. (39 Nm)
     
    Negative battery cable
     

  2.  

 
label.common.footer.alt.autozoneLogo