Nissan Car Altima & Sentra 1999-06

Hydraulic System

Print

Hydraulic System Bleeding





Click image to see an enlarged view

Fig. Clutch system bleeding points-Altima and Maxima

Bleeding is required to remove air trapped in the hydraulic system. The bleed screw is located on the clutch slave (operating) cylinder.

Some models are also equipped with a clutch damper mechanism. The clutch damper mechanism is bled in exactly the same manner as the operating cylinder. It should be bled along with the operating cylinder.

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove the bleed screw dust cap.
  4.  
  5. Attach a transparent vinyl tube to the bleed screw, immersing the free end in a clean container of clean brake fluid.
  6.  
  7. Fill the master cylinder with the proper fluid.
  8.  
  9. Open the bleed screw about34
  10.  
  11. Depress the clutch pedal quickly. Hold it down. Have an assistant tighten the bleed screw. Allow the pedal to return slowly.
  12.  
  13. Repeat the above procedure until no more air bubbles are seen in the fluid container.
  14.  
  15. Remove the bleed tube.
  16.  
  17. Replace the dust cap and refill the master cylinder.
  18.  
  19. Bleed the clutch damper, if equipped.
  20.  



Click image to see an enlarged view

Fig. Clutch system bleeding points-Altima, Maxima and 240SX

Bleeding is required to remove air trapped in the hydraulic system. The bleed screw is located on the clutch slave (operating) cylinder.

Some models are also equipped with a clutch damper mechanism. The clutch damper mechanism is bled in exactly the same manner as the operating cylinder. It should be bled along with the operating cylinder.

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove the bleed screw dust cap.
  4.  
  5. Attach a transparent vinyl tube to the bleed screw, immersing the free end in a clean container of clean brake fluid.
  6.  
  7. Fill the master cylinder with the proper fluid.
  8.  
  9. Open the bleed screw about 3 / 4 turn.
  10.  
  11. Depress the clutch pedal quickly. Hold it down. Have an assistant tighten the bleed screw. Allow the pedal to return slowly.
  12.  
  13. Repeat the above procedure until no more air bubbles are seen in the fluid container.
  14.  
  15. Remove the bleed tube.
  16.  
  17. Replace the dust cap and refill the master cylinder.
  18.  
  19. Bleed the clutch damper, if equipped.
  20.  



Click image to see an enlarged view

Fig. Clutch system bleeding points-Altima

Bleeding is required to remove air trapped in the hydraulic system. The bleed screw is located on the clutch slave (operating) cylinder.

Some models are also equipped with a clutch damper mechanism. The clutch damper mechanism is bled in exactly the same manner as the operating cylinder. It should be bled along with the operating cylinder.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the bleed screw dust cap.
  4.  
  5. Attach a transparent vinyl tube to the bleed screw, immersing the free end in a clean container of clean brake fluid.
  6.  
  7. Fill the master cylinder with the proper fluid.
  8.  
  9. Open the bleed screw about 3 / 4 turn.
  10.  
  11. Depress the clutch pedal quickly. Hold it down. Have an assistant tighten the bleed screw. Allow the pedal to return slowly.
  12.  
  13. Repeat the above procedure until no more air bubbles are seen in the fluid container.
  14.  
  15. Remove the bleed tube.
  16.  
  17. Replace the dust cap and refill the master cylinder.
  18.  
  19. Bleed the clutch damper, if equipped.
  20.  

 
label.common.footer.alt.autozoneLogo