Nissan Car Altima & Sentra 1999-06

2.5L L4 - Std 3

Print

Trouble Code: P1448



EVAP Canister Vent Control Valve Malfunction (Open)

Possible Causes:



EVAP canister vent control valve is damaged or has failed
 
EVAP control pressure sensor is damaged or has failed
 
EVAP canister vent control valve rubber tube is blocked
 
EVAP water separator has failed or canister is full of water
 
EVAP vacuum cut valve is damaged or has failed
 
TSB 00-060 (7/00) contains information related to this code
 

Trouble Code: P1464



Fuel Level Sensor Circuit High Input

Possible Causes:



Fuel level sensor signal circuit is open
 
Fuel level sensor circuit is shorted to VREF or system power
 
Fuel level sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P1490



EVAP Vacuum Cut Valve Bypass Valve Circuit Malfunction

Possible Causes:



EVAP vacuum cut valve bypass valve control circuit is open
 
EVAP vacuum cut valve bypass valve control circuit is shorted
 
EVAP vacuum cut valve bypass valve is damaged or has failed
 
PCM is damaged
 

Trouble Code: P1491



EVAP Vacuum Cut Valve/Bypass Circuit

Possible Causes:



EVAP vacuum cut bypass valve is damaged or has failed
 
EVAP vacuum cut valve is damaged or has failed
 
EVAP control system pressure sensor damaged or has failed
 
Vapor hose between fuel tank and cut valve is blocked or bent
 
Vapor hose between canister and vacuum cut valve is plugged
 
EVAP canister is damaged or EVAP purge port at tank is dirty
 
TSB 02-033 (3/02) contains information related to this code
 

Trouble Code: P1492



EVAP Canister Purge Control Solenoid Circuit Malfunction

Possible Causes:



EVAP canister purge control solenoid control circuit is open
 
EVAP canister purge control solenoid control circuit is shorted
 
EVAP canister purge control solenoid is damaged or has failed
 
PCM has failed
 

Trouble Code: P1493



EVAP Canister Purge Control Solenoid Performance (Open)

Possible Causes:



EVAP canister purge control valve is damaged or has failed
 
EVAP canister purge control solenoid valve is damaged/failed
 
EVAP vacuum hoses are clogged or disconnected
 
EVAP canister vent control valve is damaged or has failed
 
EVAP canister is full of water, or the vapor separator has failed
 
TSB 00-060 (7/00) contains information related to this code
 

Trouble Code: P0605



PCM Internal Error

Possible Causes:



Clear the code and retest for the same code. If the same code reset, the PCM will have to be replaced.
 

 
label.common.footer.alt.autozoneLogo