Nissan Car Altima & Sentra 1999-06

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove or disconnect the following:

    Loosen adjust screw and oil pump bolt, then remove belt.
     
    Remove oil pump union bolts and hose.
     
    Remove oil pump bracket bolts.
     
    Remove oil pump.
     

  6.  
  7. To install, reverse removal procedure.
  8.  
  9. Adjust belt tension.
  10.  
  11. Bleed air from the system.
  12.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove or disconnect the following:

    Reservoir tank
     
    If equipped, engine undercover
     
    Drive belts
     
    Front exhaust tube
     
    High pressure line connector
     
    Low pressure hose
     
    Power steering through bolt and the power steering pump
     

  6.  
  7. To install, reverse removal procedure.
  8.  
  9. Adjust belt tension.
  10.  
  11. Bleed air from the system.
  12.  

 
label.common.footer.alt.autozoneLogo